Hanchen Adjustable Film Coater Wet Film Coater Coating Applicator for 55mm Thickness 0-3500um KTQ-II High Accuracy +/-2um


Hanchen Adjustable Film Coater Wet Film Coater Coating Applicator for 55mm Thickness 0-3500um KTQ-II High Accuracy +/-2um by Hanchen at Toni Lynn Photography. MPN: LM-658. Hurry! Limited time offer. Offer valid only while supplies last. Hanchen Introduction Clean the instrument with appropriate solvent immediately after each use. Both ends of the scraper move in the groove and the groove must be kept free of test samples at all times. Differential heads may sometimes need to be positioned. Wear and tear or dislocation should be corrected. Reduction/elevation of components can be achieved by loosening and removing two fixed screws on each differentiator. Instruction 1.Adjust the coating thickness required by the differentiator


Hanchen Adjustable Film Coater Wet Film Coater Coating Applicator for 55mm Thickness 0-3500um KTQ-II High Accuracy +/-2um by Hanchen
4.9 out of 5 stars with 27 reviews
Condition: New
Availability: In Stock
$279.00


Quantity:  

 


Product Description & Reviews

Hanchen Introduction Clean the instrument with appropriate solvent immediately after each use. Both ends of the scraper move in the groove and the groove must be kept free of test samples at all times. Differential heads may sometimes need to be positioned. Wear and tear or dislocation should be corrected. Reduction/elevation of components can be achieved by loosening and removing two fixed screws on each differentiator. Instruction 1.Adjust the coating thickness required by the differentiator Place the coating evenly before the scraper and apply it on the sample plate to prepare the required coating Evenly place the paint in the middle of the scraper Pull down hard 2.Directly pull the scraper out of the adjustable film applicator and wipe it clean with solvent after completion Technical Parameters ★ Effective Scratch Width: 55 mm Frame material: Aluminum Scraper material:Stainless steel Coating thickness: 0 ~ 3500 μm Effective Scratch Width: 55 mm Accuracy: ± 2 μm Instrument Weight: 358 g Dimensions: 112 × 78 × 100mm (L × W × H) NOTE: If you have any questions, please refer to this video : ) we will send the product to you as soon as possible If you have any questions , please feel free to contact us

Features & Highlights

  • Adjustable Film applicator is adjustable by adjusting the two differentiators, and can adjust the vertical direction below the blade to control the gap, i.e., the final coating thickness.
  • Scraper can be adjusted up and down to control gap distance, namely the final coating thickness
  • With high precision micrometer, film ranging from 0~3500um, each 10 microns for every adjustment
  • Suitable for research on accurate assessment of subtle differences in the film thickness
  • Effective width of coating: 50mm

Additional Information

Brand:
Hanchen
Manufacturer:
Hanchen
Category:
Film Processing Equipment
Model:
LM-658
MPN:
LM-658
EAN:
6019891386425
Part Number:
LM-658
Publisher:
Hanchen
Binding:
Electronics

 


Have questions about this item (LM-658), or would like to inquire about a custom or bulk order?


If you have any questions about this product by Hanchen, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.

First Name:
Last Name:
Email Address:
Your Message:

Related Best Sellers


mpn: LM-661, ean: 6019891386456,
Hanchen Introduction Clean the instrument with appropriate solvent immediately after each use. Both ends of the scraper move in the groove and the groove must be kept free of test samples at all times. Differential heads may sometimes need to be posi...

mpn: 74395-22,
The 60-minute time range can be set in minutes for developing and seconds for enlarging control. Two hands permit quick setting by seconds, minutes, or combinations. Easy to read numerals.Photographic, Darkroom, Timer.

mpn: LM-660, ean: 6019891386449,
Hanchen Introduction Clean the instrument with appropriate solvent immediately after each use. Both ends of the scraper move in the groove and the groove must be kept free of test samples at all times. Differential heads may sometimes need to be posi...

mpn: 74395,
The 60-minute time range can be set in minutes for developing and seconds for enlarging control. Two hands permit quick setting by seconds, minutes, or combinations. Easy to read numerals.Photographic, Darkroom, Timer.